W & A Bed Makers

The Bed Maker saves moisture at planting time by providing a rolled, packed and sealed seedbed. It also provides furrows to allow water to flow evenly down the rows when you irrigate.

Designed for long life, the Eight Row @ 38" Folding Bed Maker is based on proven W&A folding implement design. The welded structural steel tubing framed unit is 7,500 pounds. The rollers are reinforced with four 3/8" steel plates welded inside the drum and to the cold roll steel 1-15/16" diameter full-length shaft. The drum scrapers are fabricated from C1060 blade material. A folding twelve row @ 30" row model is also available.

FOLDING BED MAKER

No. 1726 -- EIGHT ROW (38") FOLDING BED MAKER

with four 24" x 5/16" Wall steel drums, 9 heavy-duty furrowing attachments mounted on 7" Square front bar and 7" x 4" rear bar welded folding frame with 102" front truss hitch, two 5" x 8" hydraulic cylinders and hoses for folding, four blade material scrapers, one pair adjustable gauge wheels LESS tires. For Cat. III and Cat. III Narrow Quick Hitches.

No. 728428 --  REAR CLEAN OUT ASSEMBLY

for above 8 Row @ 38" Folding Bed Maker. Includes 9 S-Tine assemblies with 4" duck foot sweeps, attaching frames and all necessary hardware.

No. 1730 -- TWELVE ROW (30") FOLDING BED MAKER

with four 24" x 5/16" Wall steel drums, 13 heavy-duty furrowing attachments mounted on 7" Square front bar and 7" x 4" rear bar welded on folding frame with 114" front truss hitch, two 5" x 8" hydraulic cylinders and hoses for folding, four blade material scrapers, one pair adjustable gauge wheels LESS tires. For Cat. III and Cat. III Narrow Quick Hitches.

No. 728430  --  REAR CLEAN OUT ASSEMBLY

for above 12 Row @ 30" Folding Bed Maker. Includes 13 S-Tine assemblies with 4" duck foot sweeps, attaching frames and all necessary hardware.

Based on proven W&A Stacker Level Bander design, the Stacking Bed Maker is also designed for long life. Total weight of the welded structural steel tubing framed unit is 10,976 pounds. Each drum is reinforced with four 3/8" plates welded inside the drum and to the cold roll steel 1-15/16" diameter full-length shaft. The drum scrapers are fabricated from C1060 blade material.

STACKING BED MAKER

No. 1738 -- TWELVE ROW (38") STACKING BED MAKER

with four nine foot 24" x 5/16" Wall steel drums, 13 heavy-duty furrowing attachments mounted on 7" Square front bar and 7" x 4" rear bar welded stacking main frame with 140" front truss hitch bar, two 5" x 30" hydraulic cylinders and hoses for stacking, four blade material scrapers, two heavy adjustable gauge wheels LESS tires. For Cat. III Standard and Quick Hitches.

No. 728434  --  REAR CLEAN OUT ASSEMBLY

for above 12 Row @ 38" Stacking Bed Maker. Includes 13 S-Tine assemblies with 4" duck foot sweeps, attaching frames and all necessary hardware.